Applicable air handling units:
Quality level: the same quality as an original filter.
Available options:
- Efficient set: F7+M5 (ePM1 70%). Efficiently capture pollen, smog particles, and mold spores. Suitable for polluted areas and/or inhabitants with pollen allergies. Filter dimensions: 395x197x15 mm.
- Standard set: G4+G4 (Coarse 60%). Captures large particles such as dust, puff, and bugs. Suitable for clean areas with no air pollution with PM10, or PM2.5 size particles. Filter dimensions: 398×198 mm.
Filtering efficiency F7 filter:
- Coarse particles: >99% (dust, pollens)
- PM10 particles: >93% (mold spores, pet dander)
- PM2.5 particles: >80% (combustion particles)
- PM1 particles: >70% (smog particles, virus carriers)
Filtering efficiency M5 filter:
- Coarse particles: >95% (dust, pollens)
- PM10 particles: >55% (mold spores, pet dander)
- PM2.5 particles: <35% (combustion particles)
- PM1 particles: – (smog particles, virus carriers)
Filtering efficiency G4 filter:
- Coarse particles: >60% (dust, pollens)
- PM10 particles: <25% (mold spores, pet dander)
- PM2.5 particles: –
- PM1 particles: –
Please read more on filter classes…
Filter construction (F7/M5):
- Type: MPL (deep pleat). Extra-large filtering surface.
- Filtering material: high-resistance synthetic material.
- Frame: synthetic (flexible, wide surface, moisture-resistant).
- Filtering material resistant to the growth of microorganisms: complies with VDI 6022.
- Efficiency is tested in an independent laboratory in Germany.
Filter construction (G4):
- Type: fancoil.
- Filtering material: high-resistance synthetic material.
- Frame: wire from galvanized steel.
- Filtering material resistant to the growth of microorganisms: complies with VDI 6022.
Efficiency is tested in an independent laboratory in Germany.
Advantages:
To most other analog filters:
- The frame is made of moisture-resistant cardboard. Operates even at a relative humidity of 100%. Suitable for humid European climate.
- Firmly glued throughout all frame areas. Filter construction is airtight and there are no leakages of dust and other particles through connections.
- Tested according to the new EN ISO 16890 standard.
- Filters are manufactured from high-quality synthetic filtering media. Such filtering material is much stronger and damage-resistant. The holes will not appear on the filter, which may let through the dust and other dangerous particles.
- Extra filtering area (F7 filter).
- High filtering efficiency for smog particles: ePM1 70% (original 60%, most analog 55%).
- Longer servicing terms for both supply and extract air filters.
To the filters with metal frames:
- Ecological factor. Filter with synthetic material is easily recyclable.
- Bigger filtering area: lower pressure drops and longer service time.
- Airtight construction. The filter in the metal frame is usually placed without gluing. Therefore, air leakages of dusty air occur nearby the frame and media connection area.
Filter replacement period depend on outdoor air pollution:
- F7/M5 filters must be changed every 4-6 months. Single-use only.
- G4 filters: clean filters every 2 months with a vacuum cleaner. Change after 3rd cleaning.
Packing: filters are packed in a cardboard box for long-term storage in a dry environment.
Warranty: 2-year warranty if stored in proper conditions.
Manufactured in EU.
Discounts and VAT:
- VAT rates:
- EU residents depend on country’s VAT rate.
- Norway residents: 25%
- EU Companies: 0% (except LTU)
- Other Non-EU residents and Companies: 0%.
- A higher discount is being applied by purchasing more than 10 filter sets. Please contact us directly.
